Winch Type
- Model # EGRO-22

Container Size (length)
- Up to and including 24'

Rail Width
- Standard 34"

Cable
- ¾" diameter

Cable Pulley
- 8" diameter with bronze bushing

Rollers
- (3) on each rail, 4" diameter with zerk fittings

Reeving Cylinders
- Single stage, double acting, Length 97 1/2"

Pump
- Commercial Intertech

Hydraulic Tank
- 40 gallon capacity with sight gauge

Controls
- Inside and outside

Power Source
- Air shift PTO or hot shift PTO or front drive pump

Miscellaneous Specifications:

Paint
- Glossy black

Optional Equipment:
Tool Box
Formed diamond plate quarter fenders
Trailer hitch package
Rear Roller

BACK TO TOP >>

REQUEST MORE INFORMATION

Frame:
- 40'-0" Overall Length

Width:
- 34" frame width and 96" overall width

Body Stops:
- (2) 24" removable stops at front and (2) sets of adjustable locking stops for box placement

Main Beams Channel:
- 4"x16"x3/8" thick, high tension

Crossmembers:
- 5-piece bolted in the main section of the beam

Hoist Tube:
- 4"x10"x3/8" ASTM A500 Grade B
- 4"x12"x3/8" ASTM A500 Grade B

Rollers:
- 41/2" diameter with 2 1/2" stress-proof shafts that connect through both sides of the hoist tube.

Hoist System:
- a) Reeving System
b) Winch System

Support Legs:
- 2-speed, 120,000 lb. capacity support legs with cushion pads and crank on curbside.

Suspension:
- Dana Spicer Axle, 71 1/2" tack, 1/2" wall, 22,500 lb. capacity per axle. Rockwell Q Shoes, Auto Slacks, 30/30 Spring Brakes, Cast Hub and Drum.

Brakes:
- ABS

Brakes System:
- FMVSS 121 with the anti-skid feature

Tires:
- (8) 11R22.5 Goodyear G132 14 PR

Wheels:
-(8) 22.5x8.25 stud pilot steel disc PPW

Fenders:
- Full Steel

Lights and Wiring:
- FMVSS 108. 12 volt sealed system with signal stat lights

Controls:
- Manual controls for hydraulics mounted on roadside

Toolbox:
- 18"x20"x30"

Straps:
- (2) 4"x30" nylon straps with ratchet and hook

Brake Release:
- (1) brake release near hydraulic controls

Paint:
- One color urethane enamel. Special mixes may cost extra.

BACK TO TOP >>

REQUEST MORE INFORMATION

Chassis:
- Sub-frame channel 3/8"x10" HTN

Axle:
- Rockwell, Eaton or Spicer 71 1/2" 22, 500 lbs. rated capacity

Wheel Base:
- 192"

Brakes:
- ABS system front & rear axles

Controls:
- Commercial Intertech, 35 GPM

Wheels & Tires:
- Standard 22.5

Rollers:
- Three on each side, 4 1/2" on 2 1/2" axles and recessed zerk fittings

Suspension:
- Hutchens

Cable Pulley:
- 9" with 10" sheave Teflon busing

Frame:
- Rectangular tubing, 10"x4"x3/8"

BACK TO TOP >>

REQUEST MORE INFORMATION

Chassis:
- Sub-frame channel 3/8"x10"HTN

Brakes:
- Standard ABS brakes

Wheel & Tires:
- Standard 22.5 tires

Fenders:
- Full steel

Frame:
- Rectangular tubing, 12"x4"x3/8"

Rollers:
- Three on each rail, 4" diameter, on 2 1/2" axles & recessed zerks fittings

Dump Angle:
- 45 degrees

Controls:
- Commercial Intertech, 35 GPM

Axle:
- Rockwell

Hoist:
- Single action cylinder

Cable Pulley :
- 9" diameter with Teflon bushing

Landing Gear:
- Hydraulic

Pulley:
- Tulsa winch or hydraulic reeving system

Suspension:
- Hutchens 9700 Series

Axle Spacing:
- 54"

BACK TO TOP >>

REQUEST MORE INFORMATION

Carriage Assembly:
- Adequate to support 4,000 lb. hydraulic fork lifting capacity

Lights:
- Rear taillights, brakes, turn signals and back up lights meet state and federal regulations & motor vehicle code
- Lights are visible when container is on the forks
- Lights are shock mounted
- Duplicate set of rear back-up, brakes and turn signals are mounted on rear cab roof
- Rear facing work lights will illuminate forks in down extended position
- Controls are located on floor and outside by hydraulic controls
- All maker lights are armored

Chassis Modifications:
- Shorten frame of chassis to 116"-117"
- Use original equipment leaf springs and shocks
- Relocate fuel tank as needed
- Heavy-duty steel fenders to be installed over rear wheels

Forks:
- Solid frame-cut 3 1/2" forks
- Bottom pocket pick up style
- Folded in bed while truck is in transit; hydraulically controlled

Fork Hydraulic System
- Forks are hydraulic lifted up and down; 10 degrees past level on down position
- Engine driven hydraulic pump
- Automatic saftey locks are engaged when forks are in up position
- Hydraulic tank with filter is approximately 12-gallon capacity
- Hydraulic lift to be lever control with inside and outside controls air or cable
- Hydraulic control stack valve with sections as needed
- Lifting capacity to be 4,000 lbs.
- Overall vertical travel - 24"

BACK TO TOP >>

REQUEST MORE INFORMATION